How to Bend Golf Clubs Lie Angle at Home? A question many golfers ask. Bending golf clubs is a must for many golfers. You can change the lie angle to help you hit the ball straighter. In this blog post, we will show you how to do it at home. Keep in mind that it takes some practice to get it right, so don’t be discouraged if it doesn’t work perfectly at first. With a little patience, you’ll be able to improve your game significantly. Let’s get started!
Although it is often possible to change the lie angle of golf clubs by bending them, it is not without risk. If carried out incorrectly, you run the risk of snapping your club head off when you least expect it. This article will try and teach you how to bend a golf club lie angle in the safest way possible.
The only way to bend your golf clubs properly is by using a vice. This isn’t the kind of vice you use for carpentry. A metalworking vice with serrated jaws will be needed. Place the club head in the vice and tighten it without doing up the bolts too tight. Most likely, there will be some give in the club head. Once this is done, use a round punch to make an indentation on either side of the hosel.
If your serious about bending club lie’s & intend to do it often you can get a loft & lie machine here! The Golfsmith Ultimate loft/lie bending machine is a serious piece of kit, that will bend a club to your specifications. Just place the club in it & turn the dial to either raise or lower the loft by 2°, to a maximum of 8° in either direction.
This Golfsmith Ultimate loft/lie bending machine will also bend the shaft to tweak the lie angle too. Golfsmith claim the Golfsmith Ultimate lie/loft bending machine will do any lie between 5-7° flat, and up to 2° upright. That’s it! Golf clubs are very versatile, and with a little practice you’ll be able to adjust them to your advantage in no time.
There are many different clubs you can bend at home with little risk. Wedges are ideal for beginners, as they have less offset and lie angle variations compared to woods or irons. Use them as a starting point to experiment with the method. Once you have perfected your technique, you can move onto more difficult clubs such as woods and irons.
Once you feel confident enough with your bending technique, it’s time to try out a new club. Make sure the head is clean of grease and dirt before starting this process.
I hope this article helped you learn how to bend golf clubs lie angle at home.